FPS - Fuel Polishing and Transfer Systems
- remove water and sludge to keep your tanks clean and your stored fuel in "pristine condition" at all times
- decontaminate, clean and optimize the condition of the “fresh” fuel you take on board
- transfer fuel from one tank to another & fill your day tank
- View Full FPS Catalog
“You can't get out and push”
|
Smart FPS Series
The Smart FPS Series are fully automated programmable fuel optimization systems functioning as on board -tank cleaning, -fuel polishing & -transfer systems. The Smart Filtration Controller with text display monitors performance and alarm functions when filter elements require service; when high pump vacuum or pressure exists; or when water is detected in the separator or the tray.
Smart FPS systems are equipped with a three- or optionally four-stage water removal and particulate filtration. They reverse fuel deterioration, polymerization to submicron levels, decontaminating, cleaning and stabilizing your fuel providing Clear & Bright Fuel for Peak Engine Performance and Reliability at all times.
Smart FPS systems are available with SEPAR, RACOR and FLEETGUARD filters
|
Smart FPS DX and DX-D |
|
Smart FPS DX |
Smart FPS
DX/DX-D |
|
|
|
| Series |
Smart FPS DX/DX-D |
| Flow rates |
80 GPH Gear Pump |
| Port Size |
1/2” Hose Barb*
*Other Connectors Available |
| Power |
12V or 24V DC |
| Weight |
20lbs (9.01 kg) |
| Dim. (HxWxD) |
15” x 18.5” x 7.5”
38 x 47 x 19 cm |
| Fuel Conditioner |
LG-X 500 |
| Primary Filter |
5 Micron Water Block Filter
Pressure Gauge Monitor |
|
|
| |
Smart FPS SX and SX-R |
|
Smart FPS SX |
Smart FPS SX-R |
|
|
|
| Series |
Smart FPS SX |
Smart FPS SX-R |
| Flow rates |
150 gph (570 l/h) |
150 gph (570 l/h) |
| Port Size |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
| Power |
110V/60Hz or 220V/50Hz |
110V/60Hz or 220V/50Hz |
| Weight |
~50lbs (23kg) Filtration unit
~10lbs (4,5kg) Controller |
~50lbs (23kg) Filtration unit
~10lbs (4,5kg) Controller |
| Dim. (HxWxD) |
21” x 18” x 9”
(53 x 46 x 23cm) |
35” x 18” x 9”
(89 x 46 x 23cm) |
| Fuel Conditioner |
LG-X 1500 |
LG-X 1500 |
| Primary Filter |
SEPAR |
RACOR |
|
|
Smart FPS MX and MX-F |
|
Smart FPS MX |
Smart FPS MX-F |
|
|
|
| Series |
Smart FPS MX |
Smart FPS MX-F |
| Flow rates |
250 gph (950 l/h) |
250 gph (950 l/h) |
| Port Size |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
| Power |
110V/60Hz or 220V/50Hz |
110V/60Hz or 220V/50Hz |
| Weight |
~50lbs (23kg) Filtration unit
~10lbs (4,5kg) Controller |
~50lbs (23kg) Filtration unit
~10lbs (4,5kg) Controller |
| Dim. (HxWxD) |
21” x 18” x 9”
(53 cm x 46cm x 23cm) |
35” x 18” x 9”
(89 cm x 46cm x 23cm) |
| Fuel Conditioner |
LG-X 1500 |
LG-X 1500 |
| Primary Filter |
SEPAR |
SEPAR |
| Secondary filter |
|
3 micron Spin-On |
|
- Smart FPS-MX systems are designed for a flow rate of 250 GPH or 950 l/h.
- The FPS MX-F models are equipped with a secondary water block spin-on filter.
|
Smart FPS LX |
|
| |
| Smart FPS LX |
500 GPH |
110V/60Hz or 230V/50Hz - with SFC-50 |
 |
|
| |
|
 SFC Smart Filtration Controllers
The programmable Smart Filtration Controller with text display provides remote monitoring and control of your Fuel Conditioning System, its performance and alarm functions.
The controller monitors performance, signals alarm functions and shuts down the pump when filter elements require service; when high pump vacuum or pressure exists; or when water is detected in the separator or the tray. |
SFC controllers equipped with a variety of I/O configurations are also available for remote monitoring and control of prime power filtration systems with multiple tanks.
Please click here to contact us for more information, consulting or engineering support
|
FPS 500A-Series
The FPS-A Series Fuel Polishing Systems keep your tanks clean and provide clear and bright fuel for optimal engine performance and reliability at all times. They are very compact, easy to install, operate and maintain.
|
|
FPS 550-A with Alarm Panel / Racor Filter |
|
|
Series |
FPS 550-A |
| Flow rates |
150 gph (570 l/h) |
| Port Size |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
| Power |
12 or 24V |
| Weight |
~30lbs (14 kg) |
| Dim. (HxWxD) |
17” x 18” x 6”
(43 x 46 x 16cm) |
| Fuel Conditioner |
LG-X 500 |
| Primary Filter |
RACOR |
The FPS 550 is equipped with a Racor filter, pressure gauge and control panel.
|
|
|
|
FPS 750-A |
|
|
Series |
FPS 750-A |
| Flow rates |
210 gph (798 l/h) |
| Port Size |
IN 1/2” 37°Flare (#8)
OUT 1/2” 37°Flare (#8) |
| Power |
110V / 60H or 230V / 50Hz |
| Weight |
~60 lbs (27 kg) |
| Dim. (HxWxD) |
20” x 23,25” x 7,75”
(51 x 59 x 20cm) |
| Fuel Conditioner |
LG-X 1500 |
| Primary Filter |
SEPAR |
|
|
| |
|
|
TC Fuel polishing and transfer systems
- are high capacity on-board Tank Cleaning, Fuel Polishing and Transfer Systems that decontaminate and stabilize your stored fuel
- efficiently remove water, sludge and sediments that naturally accumulate in tanks
- keep your tank clean and optimize the condition of the fuel after bunkering in far away places
|
Installation
Engineering & Customer support
Algae-X FPS and TC Systems Systems combine innovative industrial quality, high capacity equipment with a very small footprint. They require virtually no maintenance to provide clear and bright, stable and dry fuel at all times.
In combining these features with our modular series of Smart Filtration Controllers we provide our customers with a truly unique, 21st century choice in automated, on-board fuel conditioning equipment.
We work with ship yards, naval architects and engineering firms to support and represent our customers in designing and manufacturing custom built, innovative automated fuel conditioning systems.
Please click here to contact us for more information, consulting or engineering support.
|
|
| |
